Place the Charging Staon on top of the weighted base (Figure 1) and secure the
Charging Staon to the base with the screws provided (Figure 4)
Weighted Base Adapter Plate
The weighted base has the same pre-drilled mounng holes as the ECS-H and UMC
Chargers.
14870 S. Pony Express Rd., #200 Bluffdale, UT 84065
www.codecorp.com (801) 495-2200
14870 S. Pony Express Rd., #200 Bluffdale, UT 84065
www.codecorp.com (801) 495-2200
Figure 5
Charging a CR2600
Baeries ship with approximately 50% baery life and should be completely charged
before inial use. Approximate me to charge a depleted baery is 4 hours via USB
cable and 2-3 hours via AC power supply.
To charge a reader, place either a palm or handled CR2600 into the charging bay (Figure
7). When the reader is seated correctly, the Charging Indicator LED (Figure 8) will turn
green.
Figure 7
Figure 8
3. Rubber feet can be placed on the corners of the
weighted base (Figure 5) or directly onto the
Charging Staon (Figure 6) to prevent slipping
from a surface.
4. (Oponal) Mounng the Charging Staon to
a Surface. Place the ‘This Side Down’ (Figure
3) side of the weighted base onto the surface,
and secure with screws. Note: Because surface
types dier, screws are not included to mount a
Charging Staon to a surface.
Figure 5
Place the Charging Staon on top of the weighted base (Figure 1) and secure the
Charging Staon to the base with the screws provided (Figure 4)
Weighted Base Adapter Plate
The weighted base has the same pre-drilled mounng holes as the ECS-H and UMC
Chargers.
Charging a CR2600
Baeries ship with approximately 50% baery life and should be completely charged
before inial use. Approximate me to charge a depleted baery is 4 hours via USB
cable and 2-3 hours via AC power supply.
To charge a reader, place either a palm or handled CR2600 into the charging bay (Figure
7). When the reader is seated correctly, the Charging Indicator LED (Figure 8) will turn
green.
Figure 7
Figure 6
Figure 8
3. Rubber feet can be placed on the corners of the
weighted base (Figure 5) or directly onto the
Charging Staon (Figure 6) to prevent slipping
from a surface.
4. (Oponal) Mounng the Charging Staon to
a Surface. Place the ‘This Side Down’ (Figure
3) side of the weighted base onto the surface,
and secure with screws. Note: Because surface
types dier, screws are not included to mount a
Charging Staon to a surface.
Figure 6
Comments to this Manuals