Code CR2 User Manual Page 21
- Page / 67
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
C001537_18_CR2_User_Manual 15
Save Settings
Radio Range and Transferring Data
The CR2 radio is a Class 1 device. If connected to another Class 1 device the reader has roughly a 100 meter (300 feet)
line of sight operating range. If connecting to a Class 2 or Class 3 device, the operating range may drop to match the
lower range. Once a reader is connected, a serial application must be opened (HyperTerminal) unless Code XML Router
is installed.
When the CR2 detects the radio is out of range, the CR2 will store data on the reader’s non-volatile memory. The reader
will continue to try and send data until radio is back in range. Once the data is sent the data will be erased from the
reader’s memory. The reader will continue to try and connect until it has reached the programmable radio time out setting.
The CR2 Bluetooth protocol allows for two (2) forms of communication:
1. Standard Bluetooth Reliability Mode (previously One Way Mode) - Communication between the reader and host,
that does not require host acknowledgement. This mode is only recommended when connecting to a device well
within its specied range or if connecting to a simple device (e.g., printer). There are two settings in this mode:
• Max Range (Default) - Greater range but data reliability is lower
• Max Reliability - Limits range but reliability is improved
RF Standard Bluetooth RF Standard Bluetooth
Reliability Mode (Max Range) Reliablility Mode (Max Reliability)
Note: One Way Mode doesn’t guarantee data integrity, and you may have data loss when operating in the
fringes of radio range or in the presence of radio interference.
2. Additional Bluetooth Reliability Mode (previously Two Way Mode) - This mode requires the implementation of
software at the application level.* The reader receives conrmation via packet protocol verication and is 100%
reliable. Data will be automatically
retransmitted if necessary.
RF Additional Bluetooth
Reliability Mode
* Note: You will need either Code XML Router Software or a Code XML Bluetooth Modem on the PC side to use the
Additional Bluetooth Reliability Mode.
If you are using the CodeXML Bluetooth Modem, you must use RF Additional Bluetooth Reliability Mode.
1.7 - Bluetooth Radio Operation (continued)
- Code Reader 2.0 1
- Laser aperature 2
- Table of Contents 4
- Chapter 1 - Getting Started 7
- 1.1 - Introduction 8
- 1.2 - Unpacking 9
- Figure 1.1 10
- Figure 1.3 10
- Figure 1.2 10
- 1.4 - Attaching Handles 11
- 1.5 - Batch Operation 12
- Save Settings 13
- 1.6 - Cabled Operation 14
- 1.6.2 - CR2 as a USB Keyboard 15
- 1.6.2.2 - Keyboard Support 16
- PS/2 Factory Reset 17
- 18
- 1.7.1 - Introduction 20
- (continued) 21
- (Continued) 25
- 1.8 - CR2 Feedback Guide 31
- Bluetooth Radio Feedback 32
- Figure 1.24 33
- SXGA Imaging Area 34
- 1.11 - Decode Zone 35
- 2.1 - Introduction 37
- Left Trigger Take Picture 39
- Right Trigger Take Picture 39
- Handle Trigger Take Picture 40
- 2.10 - Continuous Scan 41
- On Off (Default) 42
- 3.1 - Aztec Symbology 44
- 3.2 - Codabar Symbology 44
- 3.3 - Codablock F Symbology 44
- 3.4 - Code 11 Symbology 44
- 3.5 - Code 39 Symbology 45
- 3.6 - Code 93 Symbology 45
- 3.7 - Code 128 Symbology 46
- 3.8 - Composite Symbologies 46
- 3.9 - Data Matrix Symbology 46
- 3.12 - Maxicode Symbology 47
- 3.10 - GoCode Symbology 47
- 3.14 - Micro PDF417 Symbology 48
- 3.15 - MSI Plessy Symbology 48
- 3.16 - NEC 2 of 5 Symbology 48
- 3.19 - Pharmacode 49
- 3.20 - Postal Symbologies 49
- 3.18 - PDF 417 Symbology 49
- 3.21 - QR Code Symbology 50
- 3.23 - Telepen Symbology 51
- 3.24 - UPC/EAN/JAN 51
- 4.2 - Code Readability Index 53
- 4.3 - Laser Settings 54
- 4.6 - Reader Settings Lock 55
- 4.7 - Lock-out Link Mode 56
- Least Accurate 58
- 5.2 - Windowing 59
- 5.3 - Mirror Decoding 60
- 6.1 - Prex Settings 62
- 6.2 - Sufx Settings 62
- 6.4 - Reader Text Commands 63
- Bootloader mode is 65
- rmware 65
- 7.3 - Warranty 66
- 7.4 - CR2 Accessories 67
- 7.6 - CR2 Maintenance 67
Related products and manuals for Equipment Code CR2
Equipment Code CR1200 User Manual
(39 pages)
(39 pages)
Equipment Code CR3 User Manual
(68 pages)
(68 pages)
© 2020, manymanuals.com. All rights reserved. | 0.107 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals