Code CR1021 Specifications download pdf (Page 27)

OPTICON Universal menu book

U20

2.3. Wireless options

This section is intended to configure a wireless

connection to an Opticon cradle and third party

dongles. Options are available to minimize the

reader’s power consumption and to maximize

working time and enable secure data

exchange.

Default Bluetooth connection:

By default the reader is configured to connect

to the Opticon cradle. Simply read the twelve

character Bluetooth address label on the

bottom of the cradle. The reader automatically

connects to the cradle and automatically

configures the pin code, authentication and

encryption.

Default IEEE 802.15.4 connection:

By default the reader is configured to connect

to the Opticon cradle. Simply read the ten-

character address label on the bottom of the

cradle. The reader automatically connects to

the cradle and automatically configures the pin

code, authentication and encryption.

With IEEE 802.15.4, the connection only exists

during data transfers. Therefor the options

"Auto disconnect" and "Auto reconnect" are not

supported.

RS232 cradle connection:

In case the cradle is connected to the computer

via RS232, the communication parameters

such as baud rate, data bits, parity and stop

bits can be configured via the bar code reader.

For baud rate settings and for data, parity and

stop bits refer to the applicable paragraphs as

described earlier in this chapter.

USB cradle connection:

In case the cradle is connected to the computer

via USB, the USB driver for the cradle needs to

be installed. This driver can be downloaded

from www.opticon.com. The USB driver installs

a serial port on the computer. Please consult

your sales office for not listed platforms.

Bluetooth dongle connection:

In case a third party Bluetooth dongle is used,

the Bluetooth address, pin code and security

options needs to be configured manually.

Consult your Bluetooth dongle manual how to

obtain the Bluetooth address, how to configure

the pin code and secure transmission. You

need this information to configure the bar code

reader. The Bluetooth dongle's driver installs a

serial port on the computer, which is used by

the bar code reader to transmit the data.

Keyboard emulation:

In case keyboard emulation is required,

Opticon's program OpticonRL can convert the

serial data from a COM port into keyboard data.

Ask your local dealer or sales office how to

obtain Tscan.

Enable auto connect to Opticon cradle:

After reading the address label on the cradle,

the reader immediately tries to establish a

connection.

Disable auto connect to Opticon cradle:

After reading the address label on the cradle,

the reader needs to be connected manually.

Connect to other Bluetooth device:

In order to connect to a different Bluetooth

device scan the applicable menu labels in the

following configuration order:

• set Bluetooth device address (mandatory)

• set Security (optional)

• read label: Manually connect (mandatory)

Bluetooth options:

The reader can be configured for the options:

• set connection (mandatory), choose from

trigger connection or auto connection

• select an address (mandatory)

• select security method (optional)

• set power savings (optional)

• select memorizing options (optional)

IEEE 802.15.4 options:

The reader can be configured for the options:

• set connection (mandatory)

• set trigger connect options (optional)

• set power savings (optional)

• select memorizing options (optional)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 150 151

Comments to this Manuals

No comments