C003525_06_CR1200_User_Manual 28
Save Settings
50 Most Accurate 75 100 125
1600 (Default)
150 200 400 Least Accurate
6.4.1 - Prex Settings
If you scan the following codes, you will lose any unsaved settings. Make sure to save settings on your reader
before scanning the prex codes. If you scan more than one prex you will receive each scanned prex in your
scanned data; (i.e., if you scan comma prex twice, you will get two comma prexes). Scan the following codes to set
appropriate prex:
Prex - Comma Prex - Space Prex - Tab (USB Keyboard Mode)
Prex - Tab (RS-232) Prex - Erase Prex - Carriage Return Line Feed
(RS-232)
Note: If you require a special conguration, please contact Code at (801) 495-2200.
Use only with
keyboard
applications
Use only with
serial applications
Use only with
serial applications
6.3 - Mirror Decoding
Scan the following codes to enable/disable the mirroring feature:
Mirroring On Mirroring Off (Default)
Note: The Mirroring feature allows the CR1200 to read codes as they are seen through a mirror (inversed 180°). If the
Mirroring feature is enabled, non-mirrored reading ability will be disabled.
6.4 - Adding Prex Settings
Some applications may require specic characters be present at the front or back of decode packets sent to the host.
The Add Prex and Add Sufx options allow you to add the characters required by the host application.
Comments to this Manuals