Code CR1200 User Manual download pdf (Page 34)

C003525_06_CR1200_User_Manual 29

Save Settings

If you scan the following codes, you may lose your current settings. Make sure to save settings on your reader before

scanning the Sufx codes. If you scan more than one sufx you will receive each scanned sufx in your scanned data;

(i.e., if you scan comma sufx twice, you will get two comma sufxes). Scan the following codes to set appropriate sufx:

Sufx - Carriage Return (RS-232) Sufx - Comma Sufx - Line Feed

Sufx - Carriage Return Line Feed Sufx - Space Sufx - Enter

Use only with

serial applications

(RS-232)

6.5 - Erase Prex and Sufx Settings

Scan the following codes to erase all prex and sufx data.

Erase Prex & Sufx Data

6.6 - Reader Text Commands

Enabling Reader Text Commands allows the CR1200 to accept text commands via serial communications. Scan the fol-

lowing codes to enable/disable reader text commands:

Reader Text Commands On Reader Text Commands Off - Default

Note: Text commands can only be sent to the reader when it is active. Refer to Reader-Host Interface Control Document

for more information. www.codecorp.com/readericd.php.

6.4.2 - Sufx Settings

Use only with

keyboard

applications

Use only with

serial applications

(USB Keyboard Mode)

Sufx - Tab (Keyboard Mode) Sufx - Tab (Serial) Sufx - Erase

Use only with

serial applications

Use only with

keyboard

applications

1 2 ... 29 30 31 32 33 34 35 36 37 38 39

No comments

Code CR1200 User Manual Page 34