Code CR2 User Manual

C001537_18_CR2_User_Manual 1Save Settings Manual Version 18This version of the manual released with rmware version 4058. Release Date: 3/24/

C001537_18_CR2_User_Manual 4 Save Settings1.3 - Reader Battery InstallationAttaching and Detaching the Lithium Ion BatteryThe CR2 has an option

C001537_18_CR2_User_Manual 5Save Settings1.4 - Attaching HandlesH1 - Handle1. Place the CR2 in the cradle of the handle and slide the unit back (

C001537_18_CR2_User_Manual 6 Save Settings1.5 - Batch Operation1.5.1 - IntroductionThe CR2 unit features a batch mode for applications requirin

C001537_18_CR2_User_Manual 7Save SettingsTransferring and Deleting Data There are three different codes to transfer and delete data in memory.1.

C001537_18_CR2_User_Manual 8 Save Settings1.6 - Cabled OperationCR2 with Cabled Handle - If a handle was purchased for use with the CR2, the 8

C001537_18_CR2_User_Manual 9Save Settings1.6.2 - CR2 as a USB KeyboardTo connect the CR2 to your host computer via USB interface: 1. Attac

C001537_18_CR2_User_Manual 10 Save Settings1.6.2.2 - Keyboard SupportScan the following codes to set appropriate keyboard mapping:US English (

C001537_18_CR2_User_Manual 11Save Settings1.6.3 - PS/2 Cable Installation Guide1. Power off the computer. If you disconnect the computer’s keyboa

C001537_18_CR2_User_Manual 12 Save SettingsRS-232 Factory Default SettingsMode: RS-232 One Way ModeBaud Rate: 57600Stop Bits: 2Data Bits: 8

C001537_18_CR2_User_Manual 13Save Settings1.6.4.1 - Additional RS-232 (Serial) Communication Data Bit SettingsScan the following codes to set the a

C001537_18_CR2_User_Manual iSave SettingsStatement of Agency ComplianceThe CR2 can be set to use targeting lasers. The CR2’s targeting laser emits

C001537_18_CR2_User_Manual 14 Save Settings1.7 - Bluetooth Radio Operation1.7.1 - IntroductionThe CR2 features a Bluetooth® wireless radio. The

C001537_18_CR2_User_Manual 15Save SettingsRadio Range and Transferring DataThe CR2 radio is a Class 1 device. If connected to another Class 1 devic

C001537_18_CR2_User_Manual 16 Save SettingsPermanently Establishing a Connection Scan the Save Settings Code at the bottom of the page to make

C001537_18_CR2_User_Manual 17Save Settings1.7.4 - Bluetooth Radio Time Out Settings Scan the following codes to set the period of time before the B

C001537_18_CR2_User_Manual 18 Save Settings1.7.7 - Conguration for Belkin Bluetooth Manager Software (Version 1.4.2.10)In this version of the

C001537_18_CR2_User_Manual 19Save Settings4. Open the “Accessibility” Tab and verify that “All Devices” are allowed to connect (this is the defaul

C001537_18_CR2_User_Manual 20 Save Settings1.7.8 - Conguration for Toshiba Bluetooth Stack Instructions (continued)3a. Go to http://www.cod

C001537_18_CR2_User_Manual 21Save Settings1.7.8 - Conguration for Toshiba Bluetooth Stack Instructions (continued)4a. Uncheck the settings unde

C001537_18_CR2_User_Manual 22 Save Settings1.7.9 - Conguration for Microsoft Bluetooth Stack Instructions1. Right click on the Microsoft Bl

C001537_18_CR2_User_Manual 23Save Settings1.7.9 - Conguration for Microsoft Bluetooth Stack Instructions (continued)2a. Go to http://www.codecorp

C001537_18_CR2_User_Manual ii Save SettingsCode Reader 2.0 User ManualCopyright © 2006 Code Corporation.All Rights Reserved.The software descri

C001537_18_CR2_User_Manual 24 Save Settings1. Insert the Code Router Bluetooth Edition for Windows CD into your PC’s CD drive. The CD will au

C001537_18_CR2_User_Manual 25Save Settings1.8 - CR2 Feedback GuideThe CR2 features two (2) LED’s on the front of the unit. These LED’s give feedbac

C001537_18_CR2_User_Manual 26 Save SettingsBluetooth Radio FeedbackAttempting to ConnectNoneFlashes BlueSolidGreenNone 4 BeepsFailed to Connect

C001537_18_CR2_User_Manual 27Save Settings1.9 - Targeting and Reading TechniquesThe CR2 utilizes digital camera technology to take a picture of a s

C001537_18_CR2_User_Manual 28 Save Settings1.10 - Imager Field of View and ResolutionThe CR2’s dual eld optical system may be modied based on

C001537_18_CR2_User_Manual 29Save Settings1.11 - Decode ZoneFigure 1.26

C001537_18_CR2_User_Manual 30 Save SettingsChapter 2 - Optimization and Trigger Programming

C001537_18_CR2_User_Manual 31Save Settings2.1 - IntroductionFrom the moment you turn on your CR2, you are taking full advantage of the dual path 1.

C001537_18_CR2_User_Manual 32 Save Settings2.2 - Global Trigger Optimization Matrix2.3 - Left Trigger Optimization MatrixBothFieldsFar FieldSXG

C001537_18_CR2_User_Manual 33Save Settings2.4 - Left Trigger ProgrammingLeft Trigger Take PictureNote: If you program a trigger to another function

C001537_18_CR2_User_Manual iiiSave SettingsTable of ContentsChapter 1 - Getting Started ...

C001537_18_CR2_User_Manual 34 Save SettingsHandle Trigger Take PictureNote: If you program a trigger to another function, you will need to rese

C001537_18_CR2_User_Manual 35Save Settings2.9 - Continuous Trigger Optimization Matrix2.10 - Continuous ScanOff (Default) OnNote: This function

C001537_18_CR2_User_Manual 36 Save Settings2.11.1 - Continuous Scan - Sleep Time OutScan one of the codes below to set the amount of time a cab

C001537_18_CR2_User_Manual 37Save SettingsChapter 3 - CR2 Programming: Symbology Settings

C001537_18_CR2_User_Manual 38 Save Settings3.1 - Aztec SymbologyScan the following codes to enable/disable Aztec symbology settings:Aztec On

C001537_18_CR2_User_Manual 39Save SettingsDisable Checksum (Default) Enable Checksum and Strip From ResultCode 39 Extended Full ASCII On Code

C001537_18_CR2_User_Manual 40 Save Settings3.7 - Code 128 SymbologyScan the following codes to enable/disable Code 128 symbology settings:Code

C001537_18_CR2_User_Manual 41Save SettingsScan the following codes to enable/disable Interleaved 2 of 5 symbology settings:Int 2 of 5 On (Default)

C001537_18_CR2_User_Manual 42 Save Settings3.14 - Micro PDF417 SymbologyScan the following codes to enable/disable micro PDF 417 symbology sett

C001537_18_CR2_User_Manual 43Save SettingsFor an explanation of Pharmacode settings and all programming codes please refer to Appendix G of the CR2

C001537_18_CR2_User_Manual iv Save Settings2.9 - Continuous Trigger Optimization Matrix ...

C001537_18_CR2_User_Manual 44 Save Settings3.22 - GS1 data bar ( formerly RSS) Symbology3.21 - QR Code SymbologyScan the following codes to ena

C001537_18_CR2_User_Manual 45Save SettingsScan the following codes to enable/disable Telepen symbology settings:Telepen On - Default Telepen

C001537_18_CR2_User_Manual 46 Save SettingsChapter 4 - Reader Feedback and Special Settings

C001537_18_CR2_User_Manual 47Save Settings4.1 - Volume and Vibration SettingsScan the following codes to set vibration mode:Vibrate On / Beep On

C001537_18_CR2_User_Manual 48 Save Settings4.3 - Laser SettingsScan one of the following codes to set the brightness of the CR2 laser. High (D

C001537_18_CR2_User_Manual 49Save Settings4.5 - Reader ID and Firmware Version4.6 - Reader Settings LockTo lock or unlock the current settings on y

C001537_18_CR2_User_Manual 50 Save SettingsThis mode can be used to establish a permanent connection between the reader and a CodeXML modem,Pre

C001537_18_CR2_User_Manual 51Save SettingsChapter 5 - Advanced Decode Performance

C001537_18_CR2_User_Manual 52 Save Settings5.1 - Set Targeting Tolerances50 Most Accurate 75 100 125 16

C001537_18_CR2_User_Manual 53Save Settings5.2 - WindowingIf only one size of bar code is being scanned in an application, the CR2 can be optimized

C001537_18_CR2_User_Manual vSave Settings5.1 - Set Targeting Tolerances ...

C001537_18_CR2_User_Manual 54 Save Settings1-Dimensional Codes ONLY (1024 x 200 pixels)Caution: It may be more difcult to read other codes whi

C001537_18_CR2_User_Manual 55Save SettingsChapter 6 - Adding a Prex or Sufx and Reader Text Commands

C001537_18_CR2_User_Manual 56 Save Settings6.1 - Prex SettingsIf you scan the following codes, you will lose any unsaved settings. Make sure t

C001537_18_CR2_User_Manual 57Save Settings6.4 - Reader Text CommandsEnabling Reader Text Commands allows the CR2 to accept text commands via RS-232

C001537_18_CR2_User_Manual 58 Save SettingsChapter 7 - CR2: Maintenance and Troubleshooting

C001537_18_CR2_User_Manual 59Save Settings7.1 - Reset Reader to Factory DefaultsScan the following codes to reset reader:Reset to USB Factory

C001537_18_CR2_User_Manual 60 Save Settings7.3 - WarrantyCode Corporation’s Code Reader 2.0 carries a three year limited warranty as described

C001537_18_CR2_User_Manual 61Save Settings7.4 - CR2 AccessoriesEXCEPT FOR THE WARRANTIES STATED ABOVE, CODE DISCLAIMS ALL WARRANTIES, EXPRESS OR IM

C001537_18_CR2_User_Manual 1Save SettingsChapter 1 - Getting Started

C001537_18_CR2_User_Manual 2 Save Settings1.1 - IntroductionCR2 is a revolutionary bar code and 2-dimensional code reader. Developed to be th

C001537_18_CR2_User_Manual 3Save Settings1.2 - UnpackingRemove the imager from its packing and inspect it for damage. If the scanner was damaged du