Code CR2 User Manual download pdf (Page 55)

C001537_18_CR2_User_Manual 49

Save Settings

4.5 - Reader ID and Firmware Version

4.6 - Reader Settings Lock

To lock or unlock the current settings on your reader please scan the codes below:

Reader Settings Locked Reader Settings Unlocked

NOTE: Prex and Sufx programming codes, memory transfer and delete commands, “Clear All CodeXML Rules” and

“Sufx -Erase/None”commands are not locked by this feature.

To nd out the Reader ID and rmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read

the following code:

Reader ID and Firmware

You will see a text string indicating your rmware version and CR2 ID number (see below):

Xap/i - Code Internal ID (not applicable)

VVVV is the application rmware version number

WWWW is the bootloader rmware version number

XXXX is the radio rmware version number

SSSSSSSSSS Reader’s serial number (ten digits)

P is “A” if running rmware is the application, “B” if BootLoader

XXX-XX+XX - Internal ID (not applicable)

Example:

Xap/i3000300006040010002363A06D-SD+SQ

Note: Code will periodically release new rmware for CR2 readers. For information on latest rmware versions, call Code

at (801) 495-2200. To upgrade rmware, please visit our website at http://www.codecorp.com/codesupport/html and

follow instructions provided.

Xap/iVVVVWWWWXXXXSSSSSSSSSSPXX-XX+XXX

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 66 67

No comments

Code CR2 User Manual Page 55